应用光纤布喇格光栅传感器监测地下管道腐蚀的新方法研究

地下管线工作环境恶劣,腐蚀是引起它破坏和失效的主要原因之一.本文提出了一种应用光纤光栅传感器监测管道腐蚀的新方法.输送石油和天然气等一些物质的管道内部存在的压力会使管道发生膨胀,进而导致管道外壁产生环向变形.假定管道为无限长,管道内部压力导致的管道外壁轴向应变可忽略不计,当管线发生腐蚀时,会导致管壁变薄,管道内部的压力又可以看作基本不变,这样就会增大管道外壁的环向应变.当管道内部压力保持恒定时,管道壁厚与应变之间存在一定的反比例关系,本文方法就是将封装好的光纤光栅传感器粘贴在管道外壁,通过监测外壁环向变形来判断管道腐蚀的情况和程度.通过理论值、模拟值和试验值三者的对比分析来说明了这种新方法是可行的,并且值得被广泛应用,为埋地管道的防灾减灾提供了一种对策.     

倾斜光纤光栅谱特性

基于倾斜光纤光栅耦合模理论,采用数值分析法研究了前后向导模耦合时倾斜角度和调制深度对倾斜光纤光栅反射谱的影响,以及导模和辐射模耦合时针对不同的入射光偏振态在倾斜角度、调制深度、光栅长度等不同时倾斜光纤光栅透射谱(或反射谱)的特性.研究结果表明,在前后向导模耦合时,不同偏振态入射光的光谱几乎相同;而对于辐射模耦合,由于反射谱的包络受消光系数的调制,而不同偏振态入射光的消光系数不同,并且倾斜角度越大不同偏振态的入射光的消光系数差别越大,故在研究辐射模耦合时需要将偏振态予以考虑.     

光载超宽带脉冲雷达信号传输性能研究

采用双并行马赫曾德尔调制器产生高斯脉冲一阶微分和二阶微分型超宽带脉冲雷达信号和光载无线电传输技术,通过仿真研究了两种超宽带脉冲雷达信号在标准单模光纤中的传输特性.结果表明,高斯脉冲一阶微分型脉冲随着传输距离的增大而不断展宽,而高斯脉冲二阶微分型脉冲则先压缩后展宽.经100km标准单模光纤传输之后,在传输终端采用色散补偿光纤对传输信号进行不同程度的色散补偿,可获得满足美国联邦通信委员会规范要求的不同宽度高斯脉冲一阶微分和二阶微分型脉冲信号.     

用布喇格光纤光栅传感器测定口腔复合树脂材料光固化收缩与温度演化特性

复合树脂材料已成为重要的牙齿美容修复材料.本文利用两种布喇格光纤光栅传感器测定了口腔复合树脂材料在光固化过程中的收缩与温度演化特性.一种为普通的光纤布喇格光栅,另一种为经过了化学镀镍的光纤布喇格光栅,同时埋入复合树脂样品中,用光照射使其固化,测得光纤布喇格光栅在固化过程中温度和应力随时间的演化曲线.实验结果表明,在光固化过程中,因为聚合反应,树脂产生了强烈的收缩应力和温度变化.掌握复合树脂的光固化收缩特性和温度变化特性对不断改良材料性能以及优化口腔材料的治疗效果具有实际意义.     

一维光子晶体斜入射波包的带隙结构

对波包的任意傅里叶分量进行坐标变换后,利用转移矩阵法推导出波包斜入射情形下一维光子晶体的色散关系表达式,利用色散关系曲线分析得出波包斜入射的第一带隙结构,与以往平面波的第一带隙结构不同,波包的带隙宽度小于平面波的带隙宽度,并且在位置上前者带隙包含在后者内部.比较了一维光子晶体分别在波包入射与平面波入射情形下带隙位置和宽度,分析了波包中心入射角的变化以及波包的角分布范围的变化对带隙结构的影响,得到了一维光子晶体对波包斜入射的带隙结构的基本特征,确定了计算波包带隙能够近似当作平面波处理的条件.研究表明,波包的带隙结构受入射角大小和波包角分布范围的影响.入射角越小,波包入射的带隙结构越接近平面波;波包的角分布范围越小,光子晶体对波包的带隙宽度和位置越接近平面波.     

基于碳纤维复合材料的月基极紫外相机照准架结构设计

为了减少月基极紫外相机的质量并保证相机的二维转动机构在卫星发射、地月变轨及月表着陆过程中受到大量级振动冲击以及月表超大温差环境下能正常工作,设计并研制了基于碳纤维复合材料（CFRP）的照准架结构。首先,设计了基于金属材料和CFRP的不同照准架结构,通过有限元法对不同材料的照准架进行分析对比,证明了CFRP照准架的优越性。温度和力学验证试验表明：基于CFRP的照准架质量小于其它材料的照准架,其刚度和热稳定性能满足极紫外相机环境适应性的要求。     

双包层光纤激光器的受激拉曼散射与热应力

 建立了高功率掺镱双包层光纤激光器的速率方程模型与热应力模型，对影响受激拉曼散射效应和热应力效应的关键参数（如纤芯半径、光纤长度、泵浦波长、泵浦方式）进行了数值模拟。结果表明:对于较小的纤芯半径，光纤内的斯托克斯光功率较大且增长迅速，因此增加纤芯半径能有效减弱受激拉曼散射效应；减小光纤长度能提高受激拉曼散射的阈值，而纤芯的热应力也增大，因此在不出现热应力引起光纤断裂的情况下，可以减小光纤长度以提高输出功率；采用976 nm波段泵浦源能提高输出功率，降低热应力的影响；两端均匀泵浦方式可以有效降低纤芯热应力，同时维持高功率输出。     

Anisotropy of the angle resolved electron attenuation at crystal surfaces

Photoemission multiple scattering theory is used to describe the electron transport in the surface region of a crystal. Intensities of photoemission from core levels of atoms situated in subsurface atomic layers are calculated as a function of the emitter distance from the surface. The electron angle resolved attenuation length (ARAL) is extracted from the exponential fitting of the intensity decays of photoemission into different directions. Substantial anisotropy of the electron ARAL is found for the Cu(1 1 1) surface in Mg Kα photoexcitation of Cu 2p_3/2 levels and correlated with the orientation of highly packed atomic rows. Enhanced photoemission contributions from specific subsurface layers, caused by electron forward focusing effects, are reported.     

Radial variation of pump and signal intensities in EDFA; accurate prediction by a novel approximation of the fundamental modal field

The doped fiber amplifier has already emerged as the indispensable potential candidate for repeaterless transmission of information processed through single mode. Therefore the fundamental modal field in the doped single-mode fiber needs to be accurately prescribed both in the pump as well as the signal to facilitate further study of their variation with distance. Based on the novel approximation of the fundamental modal field in graded-index fiber, we formulate analytical expression as regards the variation of modal intensity with radial distance from the axis of the fiber both for the pump and the signal fields and estimate such variation for step-index fiber of some typical V values as example. We find that our estimation matches excellently with the available exact results in case of both the pump and the signal and is shown to be much superior to one-parameter Gaussian approximation. In addition, our methodology involves less computation compared to the exact analysis involving cumbersome computation.     

Generation and transmission of the double-sideband optical millimeter-wave with signal carried only by optical carrier

In this paper, we have proposed a new scheme to generate double-sideband (DSB) optical millimeter-wave (mm-wave) with signal carried only by optical carrier, and its transmission performance is investigated. The theoretical and numerical results show that the DSB optical mm-wave signal generated by our scheme suffers only from the fading effect, the time shift of the sidebands has little influence on its transmission performance. The signal demodulated from the harmonic photocurrent shows a clear and open eye diagram and has good performance even if the transmission distance is very close to but not just at the fading nodes. The theoretical results are in good agreement with our numerical simulation.